• Cleanse with Lash Foam, rinse with salt water.
• Dry thoroughly before starting.
• Apply Easy Lift Primer - leave on for 30 seconds before moving on.

📌 Avoid oil-based or film-forming cleaning products – they can weaken the effect.

• Mix 30–50% Powder Lift into Cysteamine Step 1 in a small bowl.
• Stir until the mixture has a thick, balm-like consistency.
  
  📌 Coarse lashes often need a thicker mixture. You should be able to shape and place the mixture without it running.

• Place Asian Shields (or Reverse Shields) on the eyelid.
• Apply the thick Step 1 mixture directly to the entire lashes – including the tips.
• Cover with plastic wrap or use compensators.

8–12 minutes, depending on the thickness of the lashes:

8 min: nice lashes

10 min: normal lashes

12 min: coarse lashes

📌 Even if the lotion is thickened, you don't need to adjust the time – the penetration is compensated by the absence of glue.

• Gently wipe off all lotion with a dry Q-tip or pad.
• Replace the flat shield with a shield that gives the desired effect (lift/ curl/ hybrid/ teardrop)
• Now the lashes are soft and can be shaped directly on the shield without glue.

📌 The lashes easily fall into the correct position when they are properly softened.

• Mix in 30–50% Powder Lift in step 2 for more control.
• Apply the mixture by brushing the lashes onto the shield with the Wide Lami Lash Brush .
• Secure the lashes with compensator, tape or foil.

⏱ Duration of action: 8–10 minutes.
(2 minutes shorter than step 1)

Remove step 2.

Mix desired lash color + 1.5-3% oxidant and apply. You can also use Powder Lift in the color mixture if you want it thicker.

Remove the color and apply Shine Repair directly to the lashes. Leave on for 5 minutes .

This closes the cuticle, adds shine and strengthens the lashes after the treatment.

• Clean the lash area and shields with After Lift Neutralizing Foam.
• Carefully remove the shields.
• Apply Lami Juice for glow, moisture and a polished finish.

📸 Perfect for before and after photos!